Injecto Polymers IPO GMP, Price Band, Subscription Status, Allotment Date

Injecto Polymers IPO is a SME issue open from 11–16 September. The company is raising ₹56.12 Cr at a price band of ₹98 to ₹100 per share. One lot is 2400 shares.

Injecto Polymers IPO GMP (grey market premium)

₹0

Implied listing gain: ₹100 (0.00%)

Subscription

1.23x

Times the issue was bid for

On the GMP figure: grey market premium is quoted by informal dealers. No exchange publishes it, no regulator oversees it, and it is not a forecast of the listing price. Issues quoting a strong premium have listed below their issue price. Weigh the financials and the risk factors in the RHP well above this number.

Injecto Polymers IPO Review & Analysis

Our reading of the numbers below — growth rates, margins, pricing and demand are calculated from the company's own filed figures, not copied from anywhere.

Minimum retail investment

₹2,40,000

2400 shares at the upper band of ₹100

Retail limit

1 lot

the most that fits under the ₹2 lakh retail cap

Funds blocked after close

~5 days

from the closing date to listing

Fresh issue share

94.6%

₹53 Cr of the ₹56 Cr issue

Revenue growth

+43.5%

31 Mar 2025 → 31 Mar 2026

Profit growth

+97.4%

PAT ₹8.11 Cr → ₹16.01 Cr

Net profit margin

4.3%

was 3.1% in 31 Mar 2025

Debt to equity

2.61

lower is safer

Return on equity

28.94%

ROE

Peer listing record

4 of 5 listed above issue price

median listing move +7.6%

Total subscription

1.23x

across all categories

Promoter holding

88.14% → 64.35%

diluted by 23.8 percentage points

Injecto Polymers is an SME issue raising ₹56.12 Cr, offered in a band of ₹98–₹100 per share. At the upper end that is 10 times the ₹10 face value, so ₹90 of every share subscribed is share premium rather than capital. SME issues list on the BSE SME or NSE Emerge platform rather than the main board. They trade in fixed lots after listing, carry no retail-versus-HNI cut-off bidding, and are usually far less liquid, so exiting a position can take longer than on the main board.

A retail application for Injecto Polymers needs one lot of 2400 shares, which works out to ₹2,40,000 at the upper band of ₹100. SME lots are deliberately sized above ₹1,00,000, so this is a far larger single commitment than a mainboard application and rules out most small investors. Retail applications are capped at ₹2,00,000, which here is a single lot; bidding above that moves the application into the non-institutional category, and the large-HNI bucket begins at ₹10,00,000, or about 5 lots.

For Injecto Polymers, bidding runs 11-16 Sept, allotment is finalised on 17 Sep 2026, the shares list on 21 Sep 2026. Applications that do not receive an allotment have their UPI mandate released around 1 day after the issue closes. Counting from the close of bidding, money stays blocked for roughly 5 days before listing decides what the holding is worth.

The issue is reserved 11.37% to qualified institutional buyers, 33.25% to non-institutional investors, 33.27% to retail. At 33.27%, the retail portion is on the narrower side, so retail allotment turns into a lottery quickly once the book fills. An oversubscribed retail portion is not allotted in proportion to the amount applied for: applications are reduced to single lots and drawn by lot, so several small applications from different PANs are more effective than one large one.

The issue splits into ₹53 Cr of fresh capital (94.6%) and ₹3 Cr as an offer for sale. The company keeps the fresh portion for the objects of the issue, while the rest is existing shareholders monetising their stake.

Revenue moved from ₹261.85 Cr in 31 Mar 2025 to ₹375.83 Cr in 31 Mar 2026 (+43.5%), while profit after tax went from ₹8.11 Cr to ₹16.01 Cr (+97.4%). Profit grew faster than revenue, which points to operating leverage or a better cost mix rather than growth bought purely through volume.

Recently listed companies in the same space trade at a median price-to-earnings ratio of about 12.1. Comparing that with the multiple implied by this issue's ₹98–₹100 band is a more useful test of pricing than looking at the grey market premium alone.

Institutional investors have bid for 1.57x their portion against 1.28x from retail. Institutions committing ahead of retail is generally read as confidence in the pricing.

With the retail portion subscribed 1.28 times, roughly one in 1 single-lot applications can expect an allotment once the draw is made. Applying for more lots does not improve those odds in an oversubscribed retail book — every application is cut back to one lot before the lottery — so the practical lever is the number of distinct PANs applying, not the size of any one bid.

Integrated Registry Management Services Pvt.Ltd. is the registrar for this issue, which means the allotment status for Injecto Polymers is published on their portal from 17 Sep 2026. A PAN, application number or demat client ID is enough to look it up; the credited shares also appear in the demat account itself a day or so before listing.

What looks good

  • Profit is growing faster than revenue, suggesting improving operating efficiency.
  • Return on equity of 28.94% is strong for the sector.
  • Institutional demand at 1.57x is running ahead of retail.

What to watch

  • Net margin is thin at 4.3%, leaving little cushion if costs rise.
  • Debt to equity of 2.61 means the company carries more debt than equity.
  • There is no grey market premium on this issue at present, which points to muted listing-day expectations.

The figures above are worked out from the issue's own filed numbers and are for information only. They are not investment advice — read the RHP before you apply.

IPO Date11–16 September
Face Value₹10 Per Share
Price Range₹98 to ₹100
Issue Size₹56.12 Cr
Lot Size2400 Shares
Allotment Date17 Sep 2026
Listing Date21 Sep 2026
RegistrarIntegrated Registry Management Services Pvt.Ltd.

Quota Allocation

CategoryAllocation
Retail Investors33.27%
QIB (Qualified Institutional Buyers)11.37%
HNI (High Net Worth Individuals)33.25%

Subscription Status (Category-wise)

Investor CategorySubscription (times)
QIB (Ex Anchor)0
NII***0
Individual Investors0
Total **1,110
Qualified Institutional1.57x
Non Institutional1.05x
Retail Individual1.28x
Total1.23x

IPO Details

Total Issue Size56,12,400 shares (agg. up to ₹56 Cr)
Reserved for Market Maker2,83,200 shares (agg. up to ₹3 Cr)CapitalSquare Financial Services Pvt.Ltd.
Fresh Issue (Ex Market Maker)53,29,200 shares (agg. up to ₹53 Cr)
Net Offered to Public53,29,200 shares (agg. up to ₹53 Cr)
Share Holding Pre Issue1,51,77,200 shares
Share Holding Post Issue2,07,89,600 shares

IPO Timetable (Tentative)

IPO OpenFri, Sep 11, 2026
IPO CloseWed, Sep 16, 2026
AllotmentThu, Sep 17, 2026
RefundFri, Sep 18, 2026
Credit of SharesFri, Sep 18, 2026
ListingMon, Sep 21, 2026

Issue Reservation

Investor CategoryShares% of Net Issue% of Total Issue
QIB15,96,00029.95%28.44%
− Anchor Investor9,57,60017.06%
− QIB (Ex. Anchor)6,38,40011.37%
NII (HNI)18,66,00035.01%33.25%
− bNII > ₹10L12,44,40022.17%
− sNII < ₹10L6,21,60011.08%
Retail18,67,20035.04%33.27%
Firm Reservations
Market Maker2,83,2005.05%
Total56,12,400100.00%100.00%

IPO Lot Size

ApplicationLotsSharesAmount
Individual investors (IND) (Min)22400₹2,40,000
Individual investors (IND) (Max)22400₹2,40,000
S-HNI (Min)33600₹3,60,000
S-HNI (Max)89600₹9,60,000
B-HNI (Min)910800₹10,80,000

IPO Anchor Investors

Bid DateThu, Sep 10, 2026
Shares Offered9,57,600
Anchor Portion (₹ Cr.)9.58
Anchor lock-in period end date for 50% shares (30 Days)Sat, Oct 17, 2026
Anchor lock-in period end date for remaining shares (90 Days)Wed, Dec 16, 2026

Company Financials (Restated)

Period Ended31 Mar 202631 Mar 202531 Mar 2024
Assets270.93170.57121.25
Total Income375.83261.85109.80
Profit After Tax16.018.114.44
EBITDA38.0422.5712.35
NET Worth63.3447.3321.22
Reserves and Surplus48.1632.157.84
Total Borrowing165.19101.1183.35
Amount in ₹ Crore

Recently Listed IPOs in Packaging

CompanyIssue TypeIssue SizeIssue PricePE RatioListing Day CloseListing Gain/Loss %LTP
Dhaval Packaging Ltd.SME₹36.36 Cr₹9712.05₹111.68+15.13%₹112.75
Diksha Polymers Ltd.SME₹17.90 Cr₹1129.79₹120.20+7.32%₹200.00
RFBL Flexi Pack Ltd.SME₹35.33 Cr₹509.75₹55.10+10.20%₹84.55
Ecoline Exim Ltd.SME₹76.42 Cr₹14112.12₹140.50-0.35%₹173.00
Knack Packaging Ltd.Mainboard₹439.50 Cr₹17018.33₹182.98+7.64%₹178.58

IPO Objects of the Issue

#Issue ObjectsEst Amt (₹ Cr.)
1Repayment/pre-payment, in full or in part, of certain outstanding borrowings availed by Company10.00
2Funding the Capital expenditure towards setting up phase IV at existing manufacturing facility, Unit-I, situated at NH2 Bypass Road, Jaugram, Abujhati, Jamalpur, West Bengal30.50
3General Corporate Purposes
Total40.50

Key Performance Indicator (KPI)

KPIMar 31, 2026
ROE28.94%
ROCE15.64%
Debt/Equity2.61
RoNW41.73%
PAT Margin4.26%
EBITDA Margin10.13%
NAV41.73
Price to Book Value2.40

IPO Valuation

Valuation MetricPre IPOPost IPO
EPS (₹)10.557.70
P/E (x)9.4812.99
Market Cap at Offer Price₹151.77 Cr.₹207.90 Cr

Shareholding Structure

CategoryPre IPOPost IPO
Promoter and Promoter Group88.14%64.35%
Public11.86%35.65%
Total100%100%

IPO Details

Review BySubscribeMay ApplyNeutralAvoid
Brokers0000
Members0000

IPO Subscription Status

CategorySubscription (x)Shares OfferedShares bid forTotal Applications
QIB (Ex Anchor)1.576,38,4009,99,6000
NII*1.0518,66,00019,68,0000
bNII (> ₹10L)1.4712,44,40018,28,800
sNII (< ₹10L)0.226,21,6001,39,200
Individual Investor1.2818,67,20023,88,0000
Total1.2343,71,60053,55,6001,110

About Injecto Polymers

Incorporated in September 1998, Injecto Polymers Private Limited, The Company is engaged in the manufacturing of a diverse range of plastic packaging products and the trading of plastic granules and Polyvinyl Chloride (PVC) resins. The Company manufactures a wide range of packaging products, including Polypropylene (PP) Woven Fabrics, PP Woven Bags, Biaxially Oriented Polypropylene (BoPP) Bags, Leno Bags, Low-Density and Polyester Pouches, Flexible Intermediate Bulk Container (FIBC) Bags and Non-Woven Bags. These products are used across industries such as agriculture, construction, textiles, chemicals, food, pharmaceuticals, cosmetics and consumer goods. The Company primarily operates under a Business-to-Business (B2B) model, supplying customised packaging products in various shapes and sizes based on customer requirements.

Injecto Polymers operates two manufacturing units in West Bengal, located at Jaugram, Jamalpur and Andul Road, Howrah. The manufacturing facilities are supported by modern machinery, software-based monitoring systems and an in-house testing facility for quality and compliance checks. The Company's manufacturing units are certified under ISO 9001:2015 and ISO 22000:2018, and it also holds BIS certification for food-grade packaging, supporting its focus on product quality and food safety.

The Company serves institutional and industrial customers through bulk orders and offers a diversified product portfolio catering to multiple end-use industries. Its operations are supported by a focus on product customisation, quality control and customer relationships, while the location of its manufacturing facilities provides access to established industrial and logistics networks in West Bengal.

As of July 31, 2026, the Company had 158 permanent full-time employees.

Locational advantage of manufacturing units.

Quality standard certifications and quality testing.

Multi-product portfolio and customisation capabilities.

Experienced promoters and senior management team.

Check Allotment Status

Allotment Out

Injecto Polymers IPO — common questions

What is Injecto Polymers IPO?

Injecto Polymers IPO is a SME issue open from 11–16 September. The company is raising ₹56.12 Cr at a price band of ₹98 to ₹100 per share. One lot is 2400 shares.

When does Injecto Polymers IPO open and close?

The issue is open 11–16 September. Bids must be placed, and any UPI mandate approved, before the cut-off on the closing day.

What is the Injecto Polymers IPO price band?

The price band is ₹98 to ₹100 per equity share, against a face value of ₹10. Retail investors may bid at cut-off, meaning they accept the final discovered price within this band.

What is the Injecto Polymers IPO lot size?

The minimum application is 2400 shares, and bids must be in multiples of that lot.

What is the Injecto Polymers IPO issue size?

The total issue size is ₹56.12 Cr.

How is Injecto Polymers IPO reserved between investor categories?

The issue is reserved as retail 33.27%, QIB 11.37%, HNI 33.25%. If the retail portion is oversubscribed, allotment there is decided by a lottery on lot-sized applications rather than in proportion to the amount applied for.

When is the Injecto Polymers IPO allotment date?

Basis of allotment is expected to be finalised on 17 Sep 2026. You can check your status on the registrar's website (Integrated Registry Management Services Pvt.Ltd.) using your PAN.

When does Injecto Polymers IPO list?

Listing is expected on 21 Sep 2026, following the T+3 timeline that applies to Indian IPOs.

Investment Disclaimer

This information is for educational purposes only. Please conduct your own research and consult with financial advisors before making investment decisions. IPO investments carry market risks.

Other IPOs to compare

Or see the full upcoming IPO list, today's grey market premium, subscription figures and allotment status.

Related IPO News & Insights

View All
Why 90% of Traders Lose Money in Option Trading
Risk Management

Why 90% of Traders Lose Money in Option Trading

Option trading me majority retail traders loss karte hain. Is guide me janiye beginners ki common mistakes, risk management strategies aur kaise disciplined trading se losses avoid kiye ja sakte hain.

10 Mar 2026
Read More
Iran War Ka India Par Asar: Crude Oil ₹100, Rupee ₹92, Aur Share Market Crash — Aapko Kya Karna Chahiye?
News & Updates

Iran War Ka India Par Asar: Crude Oil ₹100, Rupee ₹92, Aur Share Market Crash — Aapko Kya Karna Chahiye?

US-Iran War ke baad se India mein crude oil $100 par, rupee record low ₹92 par, FPI ne ₹52,704 crore nikale, aur LPG sankat gahrata ja raha hai. Janiye is poori situation ka aapke investments par kya asar padega.

15 Mar 2026
Read More
Option Trading for Beginners – Complete Guide to Start Options Trading
Beginner Guide

Option Trading for Beginners – Complete Guide to Start Options Trading

Option trading beginners ke liye confusing ho sakti hai. Is guide me hum samjhenge option trading kya hoti hai, kaise kaam karti hai aur beginners kaise safe tarike se options trading start kar sakte hain.

11 Mar 2026
Read More